Ebservant is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Ebservant earns from qualifying purchases at no extra cost to you. Learn more.
Behringer XENYX 1002
The XENYX 1002 processes audio with 100 presets, so it suits you if you need a portable battery-powered mixer.
10 number of inputs
- Number of Inputs
- 10
- Bit Depth
- 24-bit – at or above the 24-bit / 48kHz Resolution reference figure
2 deciding specs not stated
- Power Output
- Not stated in the listing – confirm with the seller before ordering
- Sampling Rate
- Not stated in the listing – confirm with the seller before ordering
Suits podcasters starting a home studio
- Podcasters starting a home studio
- House of worship volunteers
- Small band rehearsal leaders
- Live streamers
$59 under the category median
- This Mixing Console
- $139
- Median of the 112 Mixing Consoles we screened
- $197.97
- Range
- $104.68 to $9970
- Cheaper than this one
- 30 of those 112
The XENYX 1002 in Short
Behringer XENYX 1002 Mixer processes 10 channels of audio, making it suitable for a podcast with 4 guests or a small group session.
Processing audio with high dynamic range requires a 24-bit depth, which the XENYX 1002 provides to maintain signal clarity. This ensures that the digital conversion retains enough information to prevent audible degradation during the mixing process.
The XENYX 1002 achieves this level of detail while offering 2 XENYX Mic Preamps for high-quality input gain. These preamps are the initial stage of amplification for microphones, providing a clean signal before it enters the mixer.
We evaluated 112 mixing consoles and selected 15 for this full review based on buyer ratings. This model was chosen because it has 552 buyer ratings, the 11th most of the 112 screened, and we chose at most 2 per brand. Our comparison is based on a data-driven analysis of the technical specifications provided by the manufacturer.
For those seeking a digital workflow, see our full review of the XR18.
How EB Servant picked: we started from the 200 most-reviewed mixing console listings in our retail dataset, removed duplicates, accessories, off-category products and 6 listings whose price did not fit their specifications, and 112 qualified. This product is one of 15 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the XENYX 1002
Best for: you need a compact mixing console to run a podcast with up to 4 guests or mix a DJ set with multiple controllers.
The Behringer XENYX 1002 is a practical choice for these setups at the $139 mark.
- Pro: 10 inputs allow for enough connections to handle a small group recording.
- Pro: 100 DSP effects provide a wide variety of internal processing options.
- Pro: 24-bit depth provides the standard minimum for professional-grade digital audio processing.
- Con: 10 inputs are not enough to connect a full studio rack of 12 to 16 pieces of outboard gear.
- Con: 10 inputs do not provide the 16 to 24 connections required to mix a live band with a full drum kit.
Don’t buy this if: your setup requires more than 10 simultaneous audio signals, such as a full drum kit or a large studio rack.
Price assessment: The $139 price is low for a console offering 24-bit processing and 100 built-in effects.
EB Servant score: 8.3/10 (data-driven – see “How we picked” above)
If you need a different brand, read the Mackie ProFX10 GO spec breakdown.
Key Specifications for the 10-Input Mixing Console
| Number of Inputs | 10 |
| Bit Depth | 24-bit |
| Number of Mix Buses | 2-Bus |
| Number of DSP Effects | 100 |
| Connectivity Type | auxiliary |
| Control Interface | Analog |
| Built-in Effects | Yes |
The Number of Inputs for the XENYX 1002 is 10, which measures the total quantity of individual audio signals that can be connected simultaneously.
What the Numbers Mean in Use
How 24-bit stereo FX processing maintains high audio detail
The XENYX 1002 provides 24-bit stereo FX processing, which is the standard minimum for professional-grade digital audio processing. This bit depth allows you to process audio with high dynamic range without the loss of detail that occurs in lower-resolution systems. You can choose from 100 presets including reverb, chorus, flanger, delay, and pitch shifter to shape your sound.
Because these effects run through a 24-bit processor, you can apply complex spatial effects to your mix while maintaining clarity. However, since the device features a 2-Bus configuration, you are limited to routing these effects to a specific output rather than having multiple independent FX sends for every individual channel. This makes the XENYX 1002 suitable for adding depth to a podcast or a small band, but it may limit complex routing in a large studio environment.
High headroom provided by the XENYX Mic Preamps
The XENYX 1002 includes 2 XENYX Mic Preamps designed to provide high headroom for your incoming signals. High headroom ensures that the mixer can handle louder input signals without the distortion caused by input clipping, which occurs when gain staging is ignored. These preamps allow you to connect microphones and maintain a clean signal path for your primary sources.
With 10 total inputs available, these preamps provide enough capacity to record a multi-track session for a small group or run a podcast with 4 guests. If you need to connect a full studio rack of outboard gear, the 10-input limit is not enough to accommodate a standard 12 to 16 connection count. You should verify your total required connections before ordering to ensure you do not need a larger console.
How 3-band EQ control shapes vocal frequencies
You can shape your vocals using the 3-band EQ, which provides dedicated controls for low, mid, and high frequencies on the channels. This level of control allows you to carve out space for voices by cutting muddy low frequencies or boosting clarity in the highs. The XENYX 1002 provides the specific frequency adjustments needed to balance a mix where multiple voices are present.
While 3-band EQ is effective for general tonal shaping, it does not offer the surgical precision of a multi-band parametric equalizer. If you require specific notch filtering to remove a single resonant frequency, the 3-band layout may be too broad for that task. Choosing a mixer with fewer EQ bands could result in a muddy mix that requires time-consuming fixes in post-production.
The XENYX 1002 Job by Job: What Its Figures Cover
The XENYX 1002 against the jobs buyers ask about, worked out from its listed number of inputs and bit depth and a typical need for each job.
| Job | What it takes | XENYX 1002 |
|---|---|---|
| Record a multi-track session for a small group | at least 8 to 12 count | Only at the easier end of that range – 10 count |
| Process audio with high dynamic range | at least 24 bits | Yes – 24 bits |
| Run a podcast with 4 guests | at least 8 count | Yes – 10 count |
| Connect a full studio rack of outboard gear | at least 12 to 16 count | No – 10 count |
| Mix a DJ set with multiple controllers | at least 6 to 8 count | Yes – 10 count |
How the XENYX 1002 Compares to Alternatives
The XENYX 1002 provides 10 inputs, which is more than several other budget mixing consoles that offer only 4 or 8 connections.
- The XENYX 1002 is $0.99 cheaper than the Maker hart Loop Mixer 8.
- The XTUGA CT120 12-Channel Mixer offers 12 inputs, while the XENYX 1002 provides 10.
- The No Rockville RPM45 1800w 4 Channel Mixer Amplifier is $4.05 cheaper than the XENYX 1002.
- The 8 Channel Audio Mixer is $4.26 cheaper than the XENYX 1002.
If you need a powered mixer with built-in Bluetooth or a lower price point, the Rockville RPM45BT Powered Mixer is a better choice than the XENYX 1002.
What the deciding spec costs here: Measured as price per unit of Number of Inputs, the reviewed product works out to $13.90 against a $24.96 median across the 102 other screened products that state the spec, and 18 of them deliver more of it per dollar. The cheapest screened product that beats its 10 is the DX12 – 12 Channel Audio Mixer at $104.68 with 12-Channel, which is $34.32 less than this one for more of the spec that decides this category.
You might also consider how the Yamaha AG03 performs in various setups.
Does the price of this mixing desk offer good value?
Choosing the XENYX 1002 over more expensive boards means you trade a higher number of inputs and physical mixing buses for a lower price point. While high-end consoles offer more connections for large studio racks or full drum kits, this model provides 10 inputs and 2-Bus mixing, which is enough to run a podcast with 4 guests or mix a DJ set with multiple controllers.
The XENYX 1002 sits $2 above the $137 average for the similar mixing console products we compared. You should choose this model if you need a 24-bit stereo FX processor—which handles the digital snapshots used to create effects like reverb and delay—and 100 presets for a budget-focused setup. If your project requires connecting a full studio rack or a live band with a full drum kit, you will need to look for a console that states a higher input count than 10.
Where this sits in the buyer data: Among the 112 products screened for this category, this one’s 4.3 rating places it #47, on 552 ratings – above the 53-rating median of that group, so the average rests on more feedback than most of its comparables. On price it undercuts 81 of them.
Getting the XENYX 1002 Working, and What to Check After
Setting up This Mixing Console
You must have a power source available before the XENYX 1002 can be used for mixing.
- Connect the power cable to a standard wall outlet to provide electricity to the unit.
- Plug your microphones into the 2 XENYX Mic Preamps, which provide the initial gain for your inputs.
- Connect your instruments or external gear using XLR cables for balanced microphone signals or TRS cables for balanced line signals.
- Connect the mixer to a studio monitor to hear your output while you adjust the 100 presets of built-in effects.
Warranty and support: what to check
Warranty coverage and support terms vary by seller and country.
- Confirm the specific phantom power output of the unit, as this determines if you can power condenser microphones.
- Verify the input impedance of the channels to ensure it matches your instruments and prevents signal loss.
- Check that the 24-bit FX processor settings are correctly saved to your preferred presets before the return window closes.
Test the 100 presets and all 10 inputs immediately upon arrival to ensure every channel and effect functions as expected.
What Buyers Still Want to Know About This Audio Mixer
Can I run the Behringer XENYX 1002 on batteries for a mobile setup?
Yes, the Behringer XENYX 1002 is battery powered, which allows you to operate the mixer without a wall outlet. This makes it suitable for remote recording or mobile setups where power access is limited.
Is the noise floor low enough for clean recording?
The XENYX 1002 features ultra low-noise analog circuitry to ensure clean signal paths during recording. Because it uses 24-bit processing, it provides the resolution required for professional-grade digital audio output.
Is the XENYX 1002 Right for You?
Who the XENYX 1002 suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who the XENYX 1002 is for, and what it does well
Who this sound board suits
- Podcasters starting a home studio — the 2 XENYX Mic Preamps allow for high-quality primary vocal inputs
- House of worship volunteers — the 10 channels and 3-band EQs allow for balancing multiple instruments and microphones
- Small band rehearsal leaders — the 24-bit stereo FX processor provides essential effects like reverb and delay for practice
- Live streamers — the ultra low-noise analog design ensures clean audio for real-time broadcasting
- Mobile DJs — the battery-powered capability allows for setup in locations without easy access to wall outlets
What this mixing console handles well
- Recording a vocal duo — the 2 XENYX Mic Preamps provide dedicated inputs for two microphones
- Live acoustic performances — the high headroom ensures clean signals from loud instruments
- Adding spatial depth to vocals — the 24-bit stereo FX processor with reverb and delay
- Tuning a small room’s sound — the 3-band EQs on each channel
- Mobile outdoor events — the battery-powered functionality
What the XENYX 1002 is the wrong choice for
- Large multi-track studio recording — the 10-channel limit restricts the number of simultaneous inputs
- Complex orchestral mixing — the 3-band EQ is too basic for surgical frequency carving
- High-end studio mastering — the ultra low-noise analog design is entry-level compared to high-end consoles
What to budget alongside the XENYX 1002, and what to skip
Accessories worth buying with this audio mixer
- XLR cables — required to connect microphones to the XENYX Mic Preamps
- Instrument cables — needed to connect guitars or keyboards to the remaining channels
- Studio monitors — needed to hear the output from the mixer
- Microphone stands — necessary to position microphones for the preamps
- Power adapter — required to maintain consistent power for the FX processor
Accessories you can skip buying for this mixing console
- External reverb pedal — the 24-bit stereo FX processor already includes reverb
- External delay unit — the 24-bit stereo FX processor already includes delay
- External pitch shifter — the 24-bit stereo FX processor already includes pitch shifting
Where to Buy This Mixing Console
When we looked in November 2026, the XENYX 1002 was listed at $139 – a snapshot that may have changed since.
Mixing consoles are sold by the retailers below – we do not track which of them has the XENYX 1002 in stock, so check availability and the current price with the retailer before making a trip.
- B&H Photo Video (online only) — fast shipping and reliable professional gear selection
- Amazon (online only) — wide variety of budget and entry-level brands
- Musician’s Friend (online only) — large selection of gear and trade-in options
- Full Compass (online only) — business and trade accounts for professional setups
- Sweetwater (online only) — extensive inventory and expert technical support
- Guitar Center (online and physical stores) — physical showroom for testing and in-store returns
Final Verdict on the XENYX 1002
If you need to mix a podcast with up to 4 guests or manage a DJ set with multiple controllers, the XENYX 1002 provides the necessary 10 inputs. This mixing console features 24-bit depth, which provides the standard minimum for professional-grade digital audio processing. The 100 presets allow you to quickly switch between different mixing configurations for various tasks.
The 2-Bus configuration allows for two independent mix outputs, while the 100 DSP effects—which are digital signal processing tools used to alter sound—provide options like reverb and chorus. How many inputs do you actually need for your setup? This model provides 10 connections, which is sufficient for smaller groups but falls short of the 12 to 16 inputs required to connect a full studio rack of outboard gear. The 3.6-pound weight makes it a portable option for those who prioritize a compact footprint over high-density connectivity.
You should choose the XENYX 1002 if you are a budget-conscious creator who needs a reliable analog mixer for small-scale live sound or basic studio tracking. It is available for around $139.
The 4.3 rating from 552 buyer ratings serves as a significant signal of user satisfaction for a product at this price point. The 24-bit depth ensures the device meets the requirements for high dynamic range processing.
Skip it if: You need to mix a live band with a full drum kit, as the 10 inputs do not provide the 16 to 24 connections required for that task.
Check out the best compact mixer with lexicon effects for high-quality processing.